RCA Dryer Belt Replaced

Recorded on January 1st, 2017

The General Electric WE12X10014 replacement belt arrived from Amazon and is indeed a perfect replacement for the OEM one in the RCA DRB1555RAL clothes dryer. The two videos below (for similar GE models) were instrumental in getting the repair done right.

The first big lesson was that if you’ve routed the belt through the idler pulley correctly, the blower (same axle as the motor) should turn when you turn the drum. If it doesn’t, something isn’t right. That’s what I saw on the first attempt at threading the belt — no blower movement. After I realized I wasn’t routing the belt around the pulley, I pulled the back cover off the unit and got the belt tensioned the right way. This diagram from ApplianceRepair.net shows approximately the right belt path. Our dryer has the wire-type idler arm:


The second big lesson was to take the opportunity to vacuum the inside of the dryer thoroughly while it was disassembled. There was so much linty gunk piled up that it’s amazing the dryer worked at all before. Now it dries stuff even faster and better.

All that for a total of $6.75!

blog comments powered by Disqus